Specs >> Trio KP-800
Model : Quartz PLL Auto-up DD turntable
<<< Phono motor part >>>
Drive system : Direct drive
Motor : Quartz PLL, coreless & slotless, 3-phase switching plane drive, DC servo
Starting torque : 1.2 kg/cm
Turntable : 33 cm, 1.9 kg aluminum alloy die cast
Moment of inertia : 450 kg.cm square (including rubber sheet)
Number of rotations : 33-1/3, 45 rpm
Wow and flutter : 0.006% (FG direct reading method)
SN ratio : 78dB (DIN-B)
Steady load characteristics : 0% (needle pressure up to 120g)
Startup characteristic : 3 seconds
Speed deviation : Within +/- 0.003%
Time drift : 0.0005% / h or less
Temperature drift : 0.00005% / degree C or less
Power supply voltage characteristics : 0% (+/-10V)
<<< Tone arm part >>>
Model : Static balance S-shaped pipe arm mass separation method
Arm effective length : 245 mm
Overhang : 15 mm
Tracking error : +1.8 degree to -1.0 degree
Variable stylus pressure range : 0 - 3.0g (0.1g step)
Applicable cartridge weight : 2-12g (when using the included shell)
<<< Comprehensive >>>
Attached mechanism 01 : Non-contact optical detection Auto lift-up mechanism, Static anti-skating mechanism
Attached mechanism 02 : Independent queuing mechanism, Tone arm height adjustment mechanism (Variable range 6 mm)
Power supply : AC100V, 50Hz/60Hz
power consumption : 18W (Electrical Appliance and Material Control Law)
External dimensions (WxHxD) : 490 x 155 x 448 mm
weight : 11.5 kg
Specs >> Cartridge : ADC QLM 30 MKIII
Type : MM
Fixing : Half-inch mount
Output voltage : 4.3mV bei 1kHz, 5cm/sec.
Amplifier-connection : Phono MM
Frequency range : 20-18.000Hz
Compliance : 9 x 10, 6 cm/dyne (100 Hz)
Material : diamond, bonded
Stylus type : spherical 0.7 mil
Tracking force range : 3.0-5.0 g
Recommended load resistance : 47 kOhm
Weight : 5.75g
